Speeds the ripening process and improves overall curing time by initiating on-the-stalk coloring. Also promotes uniform coloring of mature green leaves; yellowing begins within 24-72 hours of application. EPA Reg. No. 1812-361-51873

Packaging:
Available in the following:

Product Benefits:
Gives you a choice of directed sprays for bottom and middle leaves or over-the-top sprays to cover the entire plant.

Promotes uniform coloring of mature green leaves; yellowing begins within 24-72 hours of application, speeding up the ripening process.

Improves overall curing time by initiating on-the-stalk coloring.

Allows more efficient use of curing barn space and puts you in control of your harvest schedule for a more profitable bottom line!

When to use:
Treat only when leaves remaining on the stalk are mature. To ensure remaining leaves are mature, test spray several tobacco plants. Use the lower rate in a normally mature crop when experience indicates that minimum ripening inducement is required. Use the higher rate when the crop is heavy and has a tendency to be more rank or when temperatures are lower than normal. Always test spray to determine if the tobacco is mature enough to
respond to treatment with Mature XL.

Apply over-the-top Mature XL spray as a fine mist using three nozzles; one nozzle tip over the center of the plant, and one on each side, so all leaves are covered thoroughly, similar to the application pattern of Fair Plus, Fair 30, Fair 80, and FST-7.
Use a spray pressure of 40 to 60 psi.

Test Spray Procedures:
Prepare your test spray by mixing one teaspoon of Mature XL in 1 quart of water. Spray each test plant with about 1 ounce of this mixture, covering all leaves with a fine mist. Mature XL will note color immature sprayed leaves.

With Mature XL, you'll discover how to turn your green into gold!

Note: For Further Information, Please Refer to Product Label